Lexus GX J120 470 Suspension Upgrades

1

Enhancement Bush Kit - Offset

0.5 to 1 Degree of Camber Adjustment As the OEM rubber bushings deteriorate they induce undesirable characteristics into the handling of any vehicle. Having an independent front suspension on this vehicle means the OEM bushes work very hard and durability, reliability and performance are compromised. With the solid axle rear suspension, the trailing arm bushes stabilise the forward and aft movement of the axle. As the front bushings wear they allow for the dynamic geometry of the suspension to change causing handling and tyre wear issues. As the rear bushings wear they can impart steering angles on the vehicle causing the vehicle to wander all over the road and make the vehicle subject to slight to severe directional changes under braking. The panhard rod bushes control the sideways movement of the rear axle; wear in these bushings make the vehicle unstable at higher speeds and prone to directional changes under braking. SuperPro bushings are more durable and give more positive arm location than the OEM rubber bushing, resulting in a vehicle that gives the driver confidence in the stability and handling. Lifting a vehicle also lifts the centre of gravity, in turn inducing greater forces on the suspension, requiring a more resilient suspension bushing in every location to control the attitude of the front upper and lower control arms as well as the rear upper and lower trailing arms. Kit contains: - Front Control Arm Lower-Inner Front Bush Kit - Front Control Arm Lower-Inner Rear Bush Kit - Front Control Arm Upper-Inner Bush Kit - Double Offset - Front Steering Rack & Pinion Mount Bush - Rear Panhard Rod Bush Kit RearTrailing Arm Lower Bush Kit - Rear Trailing Arm Upper Bush Kit

Quantity required: 1

£1355.03 (inc. VAT)

Available to Order

Fitment Difficulty:

Fitting Time: 9hrs

2

Front Control Arm, Rear Panhard Rod & Trailing Arm Bush Kit

KIT5236K

Kit Includes: SPF2834Kx1, SPF2835Kx1, SPF2845Kx1, SPF2836Kx1, SPF2461Kx2, SPF1760Kx2

Quantity required: 1

£1096.49 (inc. VAT)

In Stock — Despatches: 1-3 days

3

Control Arm Lower-Inner Front & Rear Bush Kit

KIT0180K

CONTENTS - SPF4690K x 1, SPF4346K x 1

Quantity required: 1

£410.27 (inc. VAT)

Available to Order

Fitment Difficulty:

Fitting Time: 5hrs 30mins

Wheel-alignment required after fitment

4

Front Control Arm Upper & Lower Bush Kit

KIT5236FK

Kit Includes: SPF2834Kx1, SPF2835Kx1, SPF2845Kx1

Quantity required: 1

£633.60 (inc. VAT)

Available to Order

5

Steering Rack & Pinion Mount Bush (Power Steering)

SPF3144K

Suits O.E Rack only

Quantity required: 1

£125.38 (inc. VAT)

In Stock — Despatches: 1-3 days

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Washer(s) - used for Steel and / or Polyurethane

Fitment Difficulty:

Fitting Time: 3hrs

6

ReadyStrut Top Caps

RS002K

Strut Cap, Spring Seat, Nuts & Washers

Quantity required: 1

£145.18 (inc. VAT)

In Stock — Despatches: 1-3 days

7

Control Arm Upper Complete Assembly

A

Standard Alignment

TRC481

Left and Right Arms for Standard Replacement and Repair Upgrade. Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement The SuperPro Complete Lower Control Arm Kit will overcome the repair problems associated with seized lower inner camber bolts, worn ball joints and replacing the bushes. TRC481 - Standard Replacement - Two Complete Arm Assemblies - All SuperPro Bushings pre-installed - Up-rated Ball Joints - Improved Quality replacement Camber Bolts The perfect replacement for your worn ball joints, worn bushes and seized camber pins!

Quantity required: 1

£891.06 (inc. VAT)

In Stock — Despatches: 1-3 days

Kit Includes: 2 x Arms, 4 x Bolts

Fitment Difficulty:

Fitting Time: 2hrs

B

Camber and Caster Adjustable

TRC480

Left and Right Arms for Lifted Vehicles with Caster and Camber Correction +/- 2 Degrees of Camber Adjustment and 0 to +4 Degrees of Caster Adjustment Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement Getting the correct alignment is no longer a problem. Not only do these arms provide for better wheel alignment settings, they have been designed to include increased clearance between the arm and strut at full droop. These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle. Key Features- Increased articulation, perfect for the off road environment - Provides for camber and caster adjustment using an adjustable ball joint - Increased clearance between spring and Control Arm at full articulation - SuperPro Bushings - Made in Australia

Quantity required: 1

Please ask for pricing

Available to Order

Kit Includes: 2 x Arms, 2 x Ball Joints, 4 x Polyurethane Bushes

Fitment Difficulty:

Fitting Time: 2hrs

C

Extra Camber and Caster Adjustable

TRC482

Left and Right Arms for Lifted Vehicles with Extra Caster and Camber CorrectionArms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement The SuperPro Complete Lower Control Arm Kit will overcome the repair problems associated with seized lower inner camber bolts, worn ball joints and replacing the bushes. TRC482 - Extra Camber & Caster Adjustment - Two Complete Arm Assemblies - Offset SuperPro Bushings pre-installed for more adjustment - Up-rated Ball Joints Improved Quality replacement - Camber Bolts for four positions - Ideally suited to a lifted vehicle The perfect replacement for your worn ball joints, worn bushes and seized camber pins!

Quantity required: 1

£928.20 (inc. VAT)

In Stock — Despatches: 1-3 days

Kit Includes: 2 x Arms, 4 x Bolts

Fitment Difficulty:

Fitting Time: 2hrs

8

Control Arm Lower-Inner Front Bush Kit

SPF4690K

Replaces original shell part

Quantity required: 1

£212.34 (inc. VAT)

In Stock — Despatches: 1-3 days

Kit Includes: 2 x Polyurethane Bushes, 2 x Sleeves, 4 x Washer(s) - used for Steel and / or Polyurethane, 2 x Steel Tubes

Fitment Difficulty:

Fitting Time: 3hrs 30mins

Wheel-alignment required after fitment

9

Control Arm Lower-Inner Rear Bush Kit

SPF4346K

Standard replacement

Quantity required: 1

£233.66 (inc. VAT)

In Stock — Despatches: 1-3 days

Kit Includes: 2 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes

Fitment Difficulty:

Fitting Time: 3hrs 30mins

Wheel-alignment required after fitment

10